--- linux-2.6.19/arch/mips/Kconfig
+++ linux-2.6.19/arch/mips/Kconfig
@@ -1029,8 +1029,6 @@
 	depends on MACH_IKAN_MIPS
 endchoice
 
-source "fusiv_src/kernel/Kconfig"
-
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
--- linux-2.6.19/Makefile
+++ linux-2.6.19/Makefile
@@ -145,14 +145,8 @@
 
 srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
 TOPDIR		:= $(srctree)
-FUSIV_TOPDIR    := fusiv_src
 
 HPATH           = $(TOPDIR)/include
-FUSIV_APCODEPATH       = $(TOPDIR)/fusiv_src/kernel/ap_code
-FUSIV_APINCPATH        = $(TOPDIR)/fusiv_src/kernel/ap_code/inc
-FUSIV_DRIVERS_INCPATH  = $(TOPDIR)/fusiv_src/kernel/drivers/inc
-FUSIV_ATM_INCPATH      = $(TOPDIR)/fusiv_src/kernel/drivers/adsl
-FUSIV_DRIVERS_VOICE    = $(TOPDIR)/fusiv_src/kernel/drivers/voice/ipvoice
 # FIXME - TOPDIR is obsolete, use srctree/objtree
 objtree		:= $(CURDIR)
 src		:= $(srctree)
@@ -326,20 +320,9 @@
 LINUXINCLUDE    := -Iinclude \
                    $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
 		   -include include/linux/autoconf.h
-
-ifeq ($(TARGET_CPU),ikanos)
-CPPFLAGS        := -D__KERNEL__ $(LINUXINCLUDE) -I$(FUSIV_DRIVERS_VOICE)/include -I$(FUSIV_APCODEPATH) -I$(FUSIV_APINCPATH) -I$(FUSIV_DRIVERS_INCPATH) -I$(FUSIV_ATM_INCPATH)
-else
 CPPFLAGS        := -D__KERNEL__ $(LINUXINCLUDE)
-endif
-
-# Das will Fusiv an flags haben, ich glaube dass wir das nicht benötigen
-
 CFLAGS          := -Wall -W -Wno-unused -Wno-sign-compare -Wundef -Wstrict-prototypes -Wno-trigraphs \
                    -fno-strict-aliasing -fno-common
-# Das will Fusiv an flags haben, ich glaube dass wir das nicht benötigen
-# CFLAGS          := -Wall -Wstrict-prototypes -Wno-trigraphs 
-#
 AFLAGS          := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -465,7 +448,6 @@
 net-y		:= net/
 libs-y		:= lib/
 core-y		:= usr/
-fusiv_src-y     := fusiv_src/
 endif # KBUILD_EXTMOD
 
 ifeq ($(dot-config),1)
@@ -613,18 +595,17 @@
 
 vmlinux-dirs	:= $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
 		     $(core-y) $(core-m) $(drivers-y) $(drivers-m) \
-		     $(net-y) $(fusiv_src-y) $(net-m) $(libs-y) $(libs-m)))
+		     $(net-y) $(net-m) $(libs-y) $(libs-m)))
 
 vmlinux-alldirs	:= $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
 		     $(init-n) $(init-) \
 		     $(core-n) $(core-) $(drivers-n) $(drivers-) \
-		     $(net-n)  $(net-)  $(fusiv_src-y) $(libs-n)    $(libs-))))
+		     $(net-n)  $(net-) $(libs-n)    $(libs-))))
 
 init-y		:= $(patsubst %/, %/built-in.o, $(init-y))
 core-y		:= $(patsubst %/, %/built-in.o, $(core-y))
 drivers-y	:= $(patsubst %/, %/built-in.o, $(drivers-y))
 net-y		:= $(patsubst %/, %/built-in.o, $(net-y))
-fusiv_src-y     := $(patsubst %/, %/built-in.o, $(fusiv_src-y))
 libs-y1		:= $(patsubst %/, %/lib.a, $(libs-y))
 libs-y2		:= $(patsubst %/, %/built-in.o, $(libs-y))
 libs-y		:= $(libs-y1) $(libs-y2)
@@ -657,7 +638,7 @@
 # System.map is generated to document addresses of all kernel symbols
 
 vmlinux-init := $(head-y) $(init-y)
-vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y) $(fusiv_src-y)
+vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
 vmlinux-all  := $(vmlinux-init) $(vmlinux-main)
 vmlinux-lds  := arch/$(ARCH)/kernel/vmlinux.lds